Alcatel Lucent 8379 DECT IBS OUTDOOR EXTERNAL ANTENNAS (3BN77020DA)

The Alcatel-Lucent 8379 DECT IBS forms a robust infrastructure for Digital Enhanced Cordless Telecommunications (DECT) both in buildings and outdoors, to connect mobile workers everywhere. They offer excellent voice quality in even the most challenging environments. The base stations pair with Alcatel-Lucent DECT handsets to deliver expert communication features (such as, dial-by-name and multi-line management) from the Alcatel-Lucent Communication Servers. The resulting solution offers cost-effective operations for all sizes of enterprise businesses. Excellent voice quality meets operational simplicity in SMB and campus environments as well as, industrial or explosive-proof environments. The base stations only require costeffective twisted pair digital connectivity, and are centrally managed by the communication servers.

Features Benefits
Built-in centralized management with Alcatel-Lucent
Communication Servers
Cost-effective operations
Support of AGAP and GAP protocols Excellent communications with AGAP including twinset with
desktop phone, multi-line management, dial-by-name
Suitable for indoor and outdoor environments including
explosive environments
Excellent voice quality everywhere
Digital connectivity over twisted pair Cost-effective technology for long buildings or buildings with
scarce IP connectivity and power outlets
Handover and roaming with former Alcatel-Lucent 4070 DECT
IBS base stations and Alcatel-Lucent 8378 DECT IP-xBS
Investments on network, cabling and base stations are
preserved

Technical specifications
Radio specifications
• DECT/GAP
• Frequency band
¬ Europe: 1.88 GHz – 1.90 GHz
¬ US: 1.92 GHz to 1.93 GHz
¬ South America: 1.91 GHz to
1.93 GHz
¬ Except Brazil: 1910 to 1920 MHz
¬ Asia: 1.90 GHz to 1.906 GHz
Note: ATEX version available for Europe only
Functionality
Channels can be disabled by the
Communication Server to adapt
to local regulations
• Channel bandwidth: 1.728 MHz
• Transmission carriers: 10
• Maximum number of simultaneous
active calls: 6
• Over the air synchronization:
Requires one channel
• Mix of IP and TDM DECT
Infrastructure supported
• RF power 250 mW, limited to
100 mW for US (DECT 6.0)
• Sensitivity: Typical -90 dBm
measured at antenna connection
at BER = 0.001
• Radio coverage from 50 m to
300 m (approximately 55 yd to
328 yd) depending on location
and environment
• Switched antenna diversity
• Integrated omni-directional antenna
2 dBi gain (maximum)
• SMA connectors for connecting
external antennas
• SAR: less than 0.25 W/kg for six
simultaneous active calls
DECT protocol specifications
• ETSI GAP compliant
• Alcatel-Lucent AGAP protocol
• DECT security, DECT encryption
• Roaming and seamless handover
• Support identity, authentication
and encryption
• Audio CODEC G726
Electrical interface
• 1 or 2 TDM UA interface(s)
• Twisted pair cabling remote feeding
up to 1200 m/approx. 1312 yd
Power feeding
• Remote power feeding on TDM link
¬ Typical consumption for six
simultaneous calls: 2 W
• Local power feeding for extended
wiring range to Communication
Server (indoor version)
• Uses same power supply as AlcatelLucent fixed wired phones (48 V)
Operating temperature
• Indoor: 41°F to 113°F (+5°C to 45°C)
• Outdoor: -4°F to 131°F (-20°C to
+55°C)
Dimensions (Wall and ceiling
mountable)
• Indoor integrated antennas
¬ Height: 8.5 in. (215 mm)
¬ Width: 6.7 in. (170 mm)
¬ Depth: 1.8 in. (45 mm)
¬ Weight: 15.5 oz. (440 g)
• Indoor for external antennas
¬ Height: 8.5 in. (215 mm)
¬ Width: 6.7 in. (170 mm)
¬ Depth: 1.8 in. (45 mm)
¬ Weight: 15.5 oz. (440 g)
• Outdoor
¬ Height: 14.4 in. (365 mm)
¬ Width: 8.3 in. (210 mm)
¬ Depth: 2.6 in. (65 mm)
¬ Weight: 52.2 oz (1.48 kg)
• ATEX
¬ Height: 29.92 in. (760 mm)
¬ Width: 11.81 in. (300 mm)
¬ Depth: 5.90 in. (150 mm)
¬ Weight: 359.8 oz (10.2 kg)
Serviceability
• LED status indication
• Firmware downloadable through
Communication Server
Regulation
• EU directives
¬ Radio Equipment Directive;
2014/53/EU
¬ ROHS 2011/65/EU
¬ Limitation of exposure of general
public to Electromagnetic fields
1999/519/EC
¬ WEEE 2012/19/EU
¬ ATEX 2014/34/EU
• Safety
¬ IEC 60950-1
¬ EN 60950-1
¬ UL 60950-1
¬ CAN/CSA-22.2 No 60950-1
• EMC
¬ EN 301 489-01
¬ EN 301 489-06
¬ EN 55032
• Radio
¬ ETSI EN 301 406
¬ FCC CFR47 Part 15D
¬ RSS-213
SAR
• EN 62311
• FCC OET Bulletin 65
• RSS-102
• NZS 2772.2
DECT
• ETSI EN 301 406
• ETSI EN 300 175
Environmental
• ETSI
¬ Operation (indoor): ETSI EN 300
019-1-3-class 3.1
¬ Operation (outdoor): ETSI EN 300
019-1-4- class 4.2H with -20°C for
low temperature and +55°C as high
temperature
¬ Storage: ETSI EN 300 019-1-1-
class 1.2
¬ Transport: ETSI EN
300-019-1-2-class 2.3
• ATEX classification: II 2 G EEx de
IIC T6
• ATEX standards
¬ EN 60079-0 general requirements
¬ EN 60079-1 Flameproof
enclosures “d”
¬ EN 60079-7 equipment protection
by increased safety “e”
• IP Class
¬ IP Class (IEC 60529)
¬ Indoor base station: IP20
¬ Outdoor base station: IP55
¬ ATEX base station: IP65
Models
• 3BN77020BA 8379 DECT IBS
integrated antennas
• 3BN77020CA 8379 DECT IBS for
external antennas
• 3BN77020DA 8379 DECT IBS
outdoor with external antennas
Accessories
• 3BN67185AA 8 dBi Gain antenna
• 3BD52212AA 7,5 dB Gain antenna
• 3BD52205AA 8dB right circular
antenna
• 3BD52206AA 8dB left circular
antenna