The Cel-Fi DUO Signal Booster greatly enhances the 3G and 4G / LTE signal and cellular service, nullifies dead zones and eliminates dropped calls. Its area of coverage and signal gain make it ideal for homes, stores, offices, warehouses and small businesses in general.

Provides 100dB of signal gain, 1,000 times stronger than traditional analogue boosters, which provide 60-70 dB of gain
Creates a bubble of approximately 40 metres of coverage or 13,000 sq. ft. / 1,200 m2, equivalent to 5-10 times larger coverage than most boosters
Boosts both 3G and 4G signal coverage, for EE or Three, and all hosted MVNO under the Network of your choice
Enhances reception and signal strength which result in reduced battery requirements on mobile phones and extended battery life.
Reduces dropped calls and improves voice clarity
No internet broadband required
Cel-Fi DUO is CE and FCC approved. It is legal to use and has been approved for use by mobile operators.
You must have at least one bar of signal somewhere in the building.

With 100dB of gain, the Cel-Fi DUO mobile signal booster will improve cellular service, and reduce your cell phone’s power requirements to extend its battery life. The Cel-Fi DUO covers up to 13,000 sq. ft. (approximately 1,200 m2) of indoor space per system. It’s fully self-contained and self-configuring, requiring no external antennas or wiring. Simply plug it in to boost indoor cellular coverage.

Technical Specifications:
Compatible with: EE, Three and all hosted Networks (3G and 4G)
Support for Band 1 (2100 MHz) and Band 3 (1800 MHz)
Certifications: CE, FCC, RoHS, IC, EAC, R&TTE, EN, SRRC
Power Consumption: Full uplink: 30 Watts / Idle: <20 Watts
Physical Specification: Network Unit: 158.5 x 146 x 59mm (560g) / Coverage Unit: 158.5 x 146 x 59mm (390g)
Electrical & Environmental Requirements: 12 VDC / 0 to 40 Celsius

Specifications
Network Three EE
Product Type Signal Boosters
Window Unit Depth (mm) 144
Window Unit Height (mm) 207
Window Unit Width (mm) 144
Window Unit Weight (g) 900

The Cel-Fi SOLO Smart Signal Booster is designed to solve mobile coverage problems for voice and data. With up to 100dB of gain, it is the most powerful carrier-grade solution available. The Cel-Fi SOLO covers up to 16,000 ft2 /1,500 m2 of indoor space per system and improves 3G and 4G mobile service by eliminating dead zones and dropped calls.
Cel-Fi products are mobile network approved and fully meets the regulatory requirements in the UK and Ireland. The Cel-Fi commitment is to protect the operator's network, deliver the best in-building mobile performance, and be the easiest solution to install.

Licence exempt and fully meets Ofcom requirements SI 2018/399 (UK) and ComReg S.I.No.283 of 2018 (Ireland)
Quick and easy setup and installation
100 dB max signal gain covering an area 16,000 ft2 / 1,500 m2 per unit
Available for O2, EE, Three, Vodafone and all Mobile Virtual Network Operators
Can easily switch between mobile networks via the Cel-Fi WAVE app
Boosts both 3G and 4G signal coverage simultaneously
Smart Signal Booster with IntelliBoost© Chipset - Unconditionally Network Safe
Remote monitoring and management with the Cel-Fi WAVE app


The system needs to detect a minimum signal outside of the building to operate.

Cel-Fi SOLO Bundle 1 includes:
Cel-Fi SOLO Smart Signal Booster
1 x Cel-Fi Whip Antenna
1 x Cel-Fi Patch Antenna
1 x 8m Coax Cable
1 x Wall mounting bracket


Installation
Quick Installation: The Cel-Fi SOLO comes with a Cel-Fi Whip Antenna and Cel-Fi Patch Antenna. These can be used to get a system up and running in minutes.
Advanced Installation: If you need a more powerful donor antenna you can connect the Cel-Fi SOLO to an outdoor Wideband Directional Antenna. If you need to get coverage to more areas of your building, you can use Splitters and connect to multiple Server Antennas

Technical Specifications
Simultaneously supports multiple channels with bandwidths from 5 to 20 MHz
Total system relay bandwidth of 60 MHz
Relays three (3) channels simultaneously (up to 20 MHz each)
Peaceful coexistence with adjacent Wi-Fi (2.4 GHz & 5 GHz), femtocells, and mobile devices
Automatic Gain Control (AGC) based on fast real-time echo-cancellation
Dynamic gain control always ensures maximum gain, best coverage in ever changing RF environments, without user intervention


Network Safe
Self-organising edge intelligence ensures that Cel-Fi SOLO do not interfere with other indoor wireless products such as Wi-Fi routers, Small Cells, and Distributed Antenna Systems (DAS).
High speed Automatic Gain Control ensures that Cel-Fi SOLO are unconditionally network safe and enables more simultaneous calls and higher data speeds.

Activate, Optimize, and Manage Cel-Fi products with the Cel-Fi WAVE App
Cel-Fi WAVE is the software application used for registering, setting-up, remotely monitoring, and updating Cel-Fi products. It provides a glance-able view to the state of your Cel-Fi environment and includes:
A dashboard overview of all your systems
Real-time data and performance metrics
Easy activation and registration
Operator changeover if you switch your network
Software update management
Users and group management


The Cel-Fi WAVE App is available for iOS, Android, PC and Mac devices.
*This unit supports multiple networks however only one network can be used at a time. The WAVE App can be used to switch between mobile networks.
For customers in Hebrides, Scottish Isles, Highlands and other remote areas in the UK: Due to Ofcom licence exemption rules, it is not permitted to relay 4G only signal. Please check on your service provider's coverage map, entering your postcode, to make sure you have Outdoor 3G Coverage in your area before purchasing. The current checker websites are: EE, Vodafone, O2, Three

Cel-Fi PRO mobile signal booster improves 3G, 4G and LTE cellular service by eliminating dead zones and dropped calls. With 100dB of gain, Cel-Fi PRO will not only improve cellular service across four (4) concurrent bands, it will also reduce your cell phone’s power requirements and extend its battery life. Cel-Fi PRO systems feature an LCD color interface, are fully self-contained and self-configuring, and require no external antennas or wiring. Simply plug it in to boost indoor cellular coverage.

OFCOM APPROVED

Provides 100dB of signal gain, 1,000 times stronger than traditional analogue boosters, which provide 60-70 dB of gain
Creates a bubble of approximately 40 metres of coverage or 13,000 sq. ft. / 1,200 m2, equivalent to 5-10 times larger coverage than most boosters
Boosts both 3G and 4G signal coverage for O2, EE, Three or Vodafone, and all hosted MVNO under the Network of your choice
Enhances reception and signal strength which result in reduced battery requirements on mobile phones and extended battery life.
Advanced technology uses built-in algorithms to boost network coverage
Reduces dropped calls and improves voice clarity
No internet broadband required
Cel-Fi PRO is CE and FCC approved. It is legal to use and has been approved for use by mobile operators.

You must have at least one bar of signal somewhere in the building.

Cel-Fi PRO is a simple mobile phone signal booster that strengthens your 3G or 4G signal coverage. Perfect for the home or office, this compact technology allows you to boost your 3G voice and data as well as 4G data coverage inside, allowing support for up to 20 devices simultaneously.

Cel-Fi PRO is CE and FCC approved. It has been approved by numerous mobile operators and regulatory bodies, and is shipping globally.
Mobile Network Features
Up to four (4) cellular bands supported.
Cel-Fi PRO simultaneously supports multiple carriers with bandwidths anywhere from 5 to 20 MHz with a total system relay bandwidth of 35 MHz.
Support for 3GPP Rel. 10 features.
Support for E-UTRA bands 1, 2, 3, 4, 5, 7, 8, 12, 20, and 28
See Data Sheet in the Downloads section below for detailed information
Antenna technology
The Cel-Fi PRO has four internal antennas built in to the units, and an external antenna port that allows for connection to an aerial (additional aerial cable not included). The multi-directional technology seeks to find the best signal and adjust to it accordingly.
Install in minutes
Installing this indoor mobile phone signal booster requires no technical knowhow, there are no complex manuals to read - it's as simple as plug-in and play.
Two units communicate wirelessly
Cel-Fi PRO consists of two units: the Window Unit (WU) and the Coverage Unit (CU). The WU sits near a window or in an area of the building that has the strongest signal from your network provider. The CU is then placed in the centre of the home or where the signal is used most.
Faster downloads
Get more from your smartphone with faster downloads, smoother streaming and improved voice coverage.
Extends your battery life
When your phone isn’t using battery to search for signal, it can save battery life for the fun stuff like downloading, making calls and taking pictures and videos.
Network Specific
Unlike other signal boosters on the market, Cel-Fi works to boost your network coverage without interfering with the network’s overall performance.
IntelliBoost©
Cel-Fi systems are powered by IntelliBoost, two custom-designed core processors that specifically work to optimise indoor reception for both 3G and 4G in real-time. It provides intelligence to the Cel-Fi system and automatically adjusts itself to ensure you are always getting the best coverage.
Cel-Fi PRO supports 3G and 4G and enhances their signal simultaneously.
Specifications
Network O2 Three EE Vodafone
Product Type Signal Boosters
Window Unit Depth (mm) 110
Window Unit Height (mm) 155
Window Unit Width (mm) 179
Window Unit Weight (g) 540

Cel-Fi PRIME 3G / 4G Signal Booster for EE, Three
Cel-Fi PRIME improves the 3G and 4G LTE cellular service, eliminates dead zones, and dropped calls. With 80dB of gain, Cel-Fi PRIME will not only improve cellular coverage, it will also reduce your cell phone’s power requirements and extend its battery life. PRIME offers plug-and-play cellular coverage for a flat, storefront, kiosk, apartment, offices or similar space, enabling clear and reliable connections within the coverage area – approximately 1,000 sq. ft. In an open space, the coverage bubble can be much larger.

80 dB max signal gain in an area approximately 11.5 metres wide (1,000 sq.ft. / 100 m2)
Carrier Approved for 3G/4G/LTE for Voice and Data
Intelliboost Chipset – Unconditionally Network Safe
Quick Setup with Integrated Antenna System and WAVE App Management
Boosts both 3G and 4G signal coverage for EE, Three, and all hosted MVNO under the Network of your choice
Cel-Fi PRIME is CE and FCC approved. It is legal to use and has been approved for use by mobile operators.
Details
Improve 3G and 4G LTE cellular service, eliminate dead zones, and dropped calls with Cel-Fi PRIME. With 80dB of gain, Cel-Fi PRIME will not only improve cellular coverage, it will also reduce your cell phone’s power requirements and extend its battery life. PRIME is plug-and-play (no installation needed) and offers clear and reliable voice connections within a coverage area of up to 100 m2 (approximately 1,000 sq. ft.). Ideal for a flat or a small home, a storefront, a kiosk, offices or similar space, enabling clear and reliable connections within the coverage area. In an open space, the coverage bubble can be much larger.

Cel-Fi PRIME uses Nextivity’s patent-pending electrically steerable antenna technology, addressing pilot pollution issues, and ensuring PRIME outperforms the competition. Cel-Fi PRIME is CE-certified, and available wherever Bands 1 (2100 MHz) and Band 3 (1800 MHz) are used.


Technical Specifications:
Compatible with: EE, Three and all hosted Networks (3G and 4G). Only works for one network at a time per unit. The network is chosen upon the initial installation and can be changed afterwards.
Certifications: CE, FEE, RoHS, IC, EAC, R&TTE & EN
Support for E-UTRA bands 1 (2100 MHz) & 3 (1800 MHz)
Cel-Fi simultaneously supports multiple channels with cellular bandwidths from 5 to 20 MHz
Auto-configured with integrated antennas (No external antenna mounting and cabling required)
Mounting system provided with multiple options for flexible placement.
Peaceful coexistence with adjacent 802.11 (2.4 GHz & 5 GHz), femtocell, and cellular devices
Intelliboost Chipset: Network Safe 3rd Generation Chipset that Optimizes Performance, using industry leading Automatic Gain Control based on fast real-time echocancellation.

Specifications
Network Three EE
Product Type Signal Boosters
Window Unit Depth (mm) 505
Window Unit Height (mm) 82
Window Unit Width (mm) 32.5
Window Unit Weight (g) 420

The Cel-Fi DUO Signal Booster greatly enhances the 3G and 4G / LTE signal and cellular service, nullifies dead zones and eliminates dropped calls. Its area of coverage and signal gain make it ideal for homes, stores, offices, warehouses and small businesses in general.

Provides 100dB of signal gain, 1,000 times stronger than traditional analogue boosters, which provide 60-70 dB of gain
Creates a bubble of approximately 40 metres of coverage or 13,000 sq. ft. / 1,200 m2, equivalent to 5-10 times larger coverage than most boosters
Boosts both 3G and 4G signal coverage, for EE or Three, and all hosted MVNO under the Network of your choice
Enhances reception and signal strength which result in reduced battery requirements on mobile phones and extended battery life.
Reduces dropped calls and improves voice clarity
No internet broadband required
Cel-Fi DUO is CE and FCC approved. It is legal to use and has been approved for use by mobile operators.
You must have at least one bar of signal somewhere in the building.

With 100dB of gain, the Cel-Fi DUO mobile signal booster will improve cellular service, and reduce your cell phone’s power requirements to extend its battery life. The Cel-Fi DUO covers up to 13,000 sq. ft. (approximately 1,200 m2) of indoor space per system. It’s fully self-contained and self-configuring, requiring no external antennas or wiring. Simply plug it in to boost indoor cellular coverage.

Technical Specifications:
Compatible with: EE, Three and all hosted Networks (3G and 4G)
Support for Band 1 (2100 MHz) and Band 3 (1800 MHz)
Certifications: CE, FCC, RoHS, IC, EAC, R&TTE, EN, SRRC
Power Consumption: Full uplink: 30 Watts / Idle: <20 Watts
Physical Specification: Network Unit: 158.5 x 146 x 59mm (560g) / Coverage Unit: 158.5 x 146 x 59mm (390g)
Electrical & Environmental Requirements: 12 VDC / 0 to 40 Celsius

Specifications
Network Three EE
Product Type Signal Boosters
Window Unit Depth (mm) 144
Window Unit Height (mm) 207
Window Unit Width (mm) 144
Window Unit Weight (g) 900